Installation Tips

Installation Tips – PopSocket Adapter Setup

---

Video Walkthrough

---

How to Install Your PopSocket Adapter

1. Prepare your PopGrip by removing it from the adhesive base.
If you ordered a pre-installed option, skip to step 3.
Otherwise, make sure you have a clean PopGrip and your adapter ready.

2. Insert the PopGrip into the Adapter:
Align the grooves of your swappable PopGrip with the opening in the top of the adapter.
Push down firmly on the center of the PopGrip top and twist clockwise until it clicks and locks into place.

📸

3. Attach the PopGrip Adapter assembly to your case.
Just push and twist into your QuadLock or Rokform mount like usual.

Pro Tip

-If the adapter feels loose on your QuadLock or Rokform case, use a thin strip of painter's tape or similar on the adapter to shim it for a tighter fit.

---

Reinstalling the PopGrip mounting point (If It gets stuck to in the base)

If the PopGrip mounting point comes loose from the collapsible TPU section:
Follow this WikiHow guide

If it’s not locking:

-Make sure no debris is stuck in the grooves.

-Some parts will wear out, if yours won’t stay in, it might be time for a replacement.