How to Install Your PopSocket Adapter

🎥 Video Walkthrough

Prefer to see it done step-by-step? Watch the install video on YouTube.

🛠 Step-by-Step Instructions

Step 1: Prep Your PopGrip

If you ordered the pre-installed version — you're golden. Otherwise:

• Remove your swappable PopGrip from its adhesive base.
• Make sure it's clean and free of gunk or old tape.

Step 2: Lock PopGrip into the Adapter

• Align the two notches on the PopGrip base with the grooves in the adapter.
• Press straight down on the PopGrip top.
• Twist clockwise until you hear/feel it click into place.

Step 3: Mount the Adapter to Your Case

• Pop the adapter into your QuadLock or Rokform mount just like any official accessory.
• You're now free to grip phone like a boss.

🔁 Reinstalling the PopGrip Base (If It Pops Out)

If the swappable base separates from the collapsible section, follow this WikiHow guide on fixing PopSockets.

👀 If It's Not Locking In…

• Check for debris: clean the adapter and PopGrip base.
• Try another PopGrip: some older grips wear out or don't lock properly.
• Still loose? Use a small strip of painter's tape around your case's mounting point to tighten things up.

💡 Pro Tips

• Don't force the twist — the grip should click in smoothly.
• Want to swap PopGrips often? Keep a spare mounted on a PopGrip coupler (sold separately).

📬 Still Stuck?

Shoot me a message on Instagram @3dcreationsbychad or reach out via the contact page — I'm happy to help.

Enjoy the ride, and stay securely connected.
— Chad